India Fastener is Number One In Business Aggregator for Fasteners & provides Std & Weight Count Solution.
IF has been started off with an initiative to link the ever growing field of technology with the world of fasteners. We have started off with an mobile solutions that facilitates you while handling your day to day weigh count issues. We already have the app for Android and iOS.
In all our efforts the core focus is innovation, and improving products for the end users. We strive extra mile to make sure you get the best and the solution helps you to focus on your core business.
Brass Fasteners are an extremely useful screw type that can be used across varying applications. The brass make-up of the screw offers a number of useful characteristics.
These include:
Anti-corrosive
Water resistant
Aesthetically pleasing
WHY USE BRASS SCREWS FOR WOODWORK?
Typically, brass screws can be more aesthetically pleasing as the brass offers a softer tan colouring that works well with wood. Typically smaller brass screws are used when building furniture or installing doors etc.
Stripping can occur when using brass screws whilst working with wood, and often a drill hole often the same size of the screw is drilled into the material first. The use of these pilot holes that are the same diameter as the unthreaded part of the brass screw helps avoid stripping and ensures the screw offers maximum strength and load capacity.
Brass is a softer metal and so must be used with more care. It is also, as always, beneficial to use a screwdriver that fits the head of the screw exactly. Use better quality brass screws to help avoid any issues, such as the range Tradefix Direct sells.
WHY USE BRASS SCREWS FOR OUTSIDE?
The anti-corrosive and water resistant nature of these screws means they are ideal for exterior use.
Quite often iron screws with a brass plating are used, but brass screws work just as well. The main benefits of these screws will be found when installed in areas that cannot be easily maintained, and should be used instead of more typical iron screws which can rust.
BRASS SCREWS FOR MARINE USE?
For decades brass screws have been used on marine equipment, purely as these are the best screws for the job. The water resistant and anti-corrosive qualities of these screws are perfect for use around the sea and underwater (or anywhere where it is generally a bit damp!)
Regular steel and iron screws can corrode from prolonged exposure to the wind, sun and rain, and so pure brass or brass plated iron screws are the best for the job.
The reason is that Mild Steel Fastener [up to 0.3%carbon] is strong and tough.The thumb rule is that if more carbon included in the alloy, the steel becomes stronger and harder but the toughness is diminished, making it more brittle. The general run of the bolts needs to be cheap, strong enough for the job and exhibit a degree of flexibility, which mild steel does. Higher grades can have more tensile strength, and be stronger, but they lose elasticity and are more expensive like the stainless steel bolts.
The reason carbon steel is used is because of the following considerations:
Functional requirements – it meets all of the requirements for the intended use.
Material properties – it can be tailored to suit the application thru control of chemistry, heat treatment(s), forming, etc.
Manufacturing process – it has a cheap, easy manufacturing process
Fabricability – like above, it sis easy to form into the desired shape with the required mechanical properties.
Availability – it is the most commonly used material for construction used. widely available.
Thermal stability – with the proper heat treatment and chemistry, it is very stable within limits,, normally matching what it is bolting together in the first place.
Cost – it is cheap to make.
All of the above considerations can be applied to other materials as well. However, carbon steel is the most commonly used material and cheapest compared to other material. Stainless Steel and Nickel alloy bolting does exist for applications that carbon steel is not suitable for (i.e. corrosive or elevated temperatures).
What Is High Tensile Bolts (H T BOLTS)?
1. what’s High Tensile Bolts? Understanding H T Bolts/Fasteners Grades.
2. Engineers, construction, automobile, manufacturing and plenty of services industry professionals know the answer to this and much of other technical questions on fasteners and fixings. But tons folks have questions, what are these numbers on some fasteners and fixings we encounter in our garage, some furniture and other household stuff. Before we answer what’s H T bolts, here are a couple of belongings you got to realize fastener and fixings or bolts. attend following slides and find out…
3. Commonly, most folks know fasteners as bolts, screws or studs. So what’s the difference between a bolt, screw and stud?
4. what’s a Nut & Bolt? The threaded rod that you simply see during this picture may be a bolt Alongside may be a nut and it’s often mated with a bolt.
5. what’s a Screw? A screw is slightly different than a bolt. Screws are externally threaded fasteners. Screws have the power of forming it’s own thread when inserted into the holes inside assembled parts.
6. what’s a Stud? Stud is different from both bolt and screw in appearance and uses. It doesn’t have head at one end sort of a normal fastener. Studs are metal rods otherwise you could say shafts with threads on each side or both ends.
7. So what are those numbers that we see in most of the fasteners?
8. These numbers on fasteners and fixings represent the last word lastingness of a bolt. In Australia, there are 3 different grades of bolts in common use. Commercial Grade Structural Grade High Tensile
9. Commercial Grade: this is often rock bottom grade with a lastingness of 4.6 or 400 MPa. Structural Grade: Structural grade comes next with a lastingness of around 800 MPa or 8.8. High Tensile High tensile bolts are the very best grade with an ultimate lastingness of 1200 MPa or 12.9
10. Presentation of THE WDS GROUP. Australia’s one stop specialized fastener and fixings specialist.
S S Fasteners are, most importantly, corrosion resistant. They have an excellent life cycle, are environmentally friendly and are 100% Recyclable. They are also resistant to high heat as well as extremely cold temperatures making stainless steel fasteners the material of choice for almost any application!
When you are moving past the design phase and into the building phase of your project, you need to make sure you have quality materials to help you get the job done right.
When it comes to putting a project together you want to make sure it holds up. We can help! With our stainless steel fasteners you won’t ever have to worry about a project falling apart. We use stainless steel because it is a quality product that will allow you to build whatever you need.
Some of our stainless steel fasteners include your basic screws, nuts, pins, washers, and anchors. However, we also have rivets that can be used for blind fastening solutions, hose clamps that can give you non-leak connections, and thread forming screws that can help you fix malleable materials. Whatever you need to do we have a quality fastener to fit your needs.
Fasteners are basically tools used to join two Objects together.
In Day to Day life we used terms as a Screws, Nuts and Bolts. These all are the ListDiffrent type of fasteners.
So Basically fastener is a Broader term whereas as screw, nut, bolts, rivets, washers etc are the parts of fasteners.
It Can Come in Various Style, Sizes and Materials.
You can buy it according to your need.
List of Different Fasteners Types of Bolts
Bolts are the form of fastener. Fasteners are accustomed to obtain or fasten materials collectively. There are some cases of bolts and component nuts. Most, if not all, bolt cases take somebody threads. The threaded screw screws into eggs to make or fasten materials together. Bolt cases include heart bolts, bike bolts and machine bolts while types of eggs include top eggs, expansion nuts and u-nuts. The expert can tell you that about these types of nuts and bolts and the various types of bolt heads.
Simmonds Marshall company, Pune: Integrated in 1960, manufacture the variety of Specialized material Insert self protection Nuts and other offer Fasteners to American, British, Japanese, ISO or Asian measure providing to the Automotive and Industrial sectors and supplies to nearly all the leading car Manufacturers in India and overseas.
List of Top Ten Fasteners Manufacturing Company in Maharashtra,
1. Tanvi Steel Industries has made a identify for itself in the listing of pinnacle suppliers of Screws ,Hex Bolts in India. The provider agency is placed in Vasai, Maharashtra and is one of the main marketers of listed products.
Tanvi Steel Industries is listed in Trade India’s listing of demonstrated agents supplying supreme excellent of Highly Durable Biden Screw ,High Grade Stainless Hex Screw ,High Demanded Allen Cap Screws etc. Buy Screws ,Hex Bolts in bulk from us for the fantastic satisfactory merchandise and service.
Anchor Fastener imageThis is generally referred to as heavy-duty Fastener as it is used to connect objects to concrete. Their design makes them suitable to be used with poles and also ensure they stay stable and secure.
There are various types of Anchor Fastener available some of them are:
L-Shaped Anchor Fasteners
Double End Rods with Plate
Headed Anchor Bolts
Swedge Bolts
Anchor bolts are used to connect structural and non-structural elements to the concrete. The connection is made by an assembling of different components such as: anchor bolts (also named fasteners), steel plates, stiffeners. Anchor bolts transfer different types of load: tension forces and shear forces. A connection between structural elements can be represented by steel column attached to reinforced concrete foundation. Whereas, a common case of non-structural element attached to a structural one is represented by the connection between a facade system and a reinforced concrete wall
Modes of Failure in tension Anchors can fail in different way when loaded in tension:[3]
Steel failure: the weak part of the connection is represented by the rod. The failure corresponds to the tensile break-out of steel as in case of tensile testing.In this case, concrete base material might be undamaged.
Pull-out: the anchor is pulled out from the drilled hole partially damaging the surrounding concrete. When the concrete is damaged the failure is also indicated as pull-through.
Concrete cone: after reaching the load-bearing capacity a cone shape is formed. The failure is governed by crack growth in concrete. This kind of failure is typical in pull-out test.
Splitting failure: failure is characterized by a splitting crack which divides the base material into two parts. This kind of failure occurs when the dimensions of the concrete component are limited or the anchor is installed close to an edge.
Blow-out failure: failure is characterized by the lateral spalling of concrete in the proximity of the anchor’s head. This kind of failure occurs for anchors (prevalently cast-in-place) installed near the edge of the concrete element.
In design verification under ultimate limit state, codes prescribe to verify all the possible failure mechanisms.
