Fastener Companies in India

Fastener Companies in India

Simmonds Marshall company, Pune: Integrated in 1960, manufacture the variety of Specialized material Insert self protection Nuts and other offer Fasteners to American, British, Japanese, ISO or Asian measure providing to the Automotive and Industrial sectors and supplies to nearly all the leading car Manufacturers in India and overseas.

Read moreFastener Companies in India

Top Ten Fasteners Manufacturing Company in Maharashtra,

List of Top Ten Fasteners Manufacturing Company in Maharashtra,

1. Tanvi Steel Industries has made a identify for itself in the listing of pinnacle suppliers of Screws ,Hex Bolts in India. The provider agency is placed in Vasai, Maharashtra and is one of the main marketers of listed products.
Tanvi Steel Industries is listed in Trade India’s listing of demonstrated agents supplying supreme excellent of Highly Durable Biden Screw ,High Grade Stainless Hex Screw ,High Demanded Allen Cap Screws etc. Buy Screws ,Hex Bolts in bulk from us for the fantastic satisfactory merchandise and service.

Read moreTop Ten Fasteners Manufacturing Company in Maharashtra,

Hex Bolt DIN 931 & 933

Hex Bolt DIN 931 & 933 Half Thread Bolt & Full Thread Bolt

A bolt is a structure of threaded fastener with an exterior male thread.

Download the India Fastener Mobile Application

  1.  Bolt Head,Bolts use a broad range of head designs, as do screws. These are designed to have interaction with the device used to tighten them. Some bolt heads rather lock the bolt in place, so that it does now not pass and a device is solely wished for the nut end.Common bolt heads encompass hex, slotted hex washer, and socket cap.The first bolts had rectangular heads, shaped through forging. These are nonetheless found, though lots extra frequent these days is the hexagonal head. These are held and became by means of a spanner or wrench, of which there are many forms. Most are held from the side, some from in-line with the bolt. Other bolts have T-heads and slotted heads.Many screws use a screwdriver head fitting, alternatively than an exterior wrench. Screwdrivers are utilized in-line with the fastener, as a substitute than from the side. These are smaller than most wrench heads and can’t normally practice the identical quantity of torque. It is now and again assumed that screwdriver heads mean a screw and wrenches mean a bolt, even though this is incorrect. Coach screws are giant square-headed screws with a tapered timber screw thread, used for attaching ironwork to timber.Head designs that overlap each are the Allen or Torx heads; hexagonal or splined sockets. These modern-day designs span a giant vary of sizes and can elevate a sizeable torque.

    Hex Bolt DIN 933 & 931

    Hex bolt
    FULL THREAD & HALF THREAD

    3.Hex bolt – Bolt with a hexagonal head and threaded body.U-Bolt – Bolt fashioned like the letter U the place the two straight sections are threaded. A straight steel plate with two bolt holes is used with nuts to preserve pipes or different spherical objects to the U-bolt.

Self Drilling Screw

POINT NO

1 . Self drilling screws have a point that acts as a drill bit and sharp cutting              threads that tap the hole during installation. Self drilling screws are a                    commonly used variety of screw for quick drilling into both metal and wood. A self drilling screw can typically be identified by its point and flute (notch)

2. Whichever name is utilized, these names are for screws that structure                   mating strings (“tapping” the strings) in a pre-penetrated gap in the                         substrate into which they are driven. A Self-Drilling Screw is a Self-Tapping         Screw with the additional element of a drill point. … In the event that a screw       will penetrate its own gap it is a Self-Drilling Screw.

3.The protected Thunder-Shot Drill Point gives quick and consistent drill     performance,effectively clears swarf,  and penetrates through 12.5mm thick steel .Phillips pan head self drilling screws have a sheet steel thread with a self driller slicing (TEK) factor to pierce thru 20 to 14 gauge metals. The greater the TEK quantity the large the drill factor to pierce heavier gauge metals. The heads use a phillips driver #1, #2 or #3 relying on the measurement of the screw. These screws are used in the exterior elements.

4. Some self-tapping screws are additionally self-drilling, which skill that, in addition to the tap-like flute in the main threads, there is additionally a preliminary drill-like fluted tip that appears a great deal like the tip of a middle drill. These screws mix a thrilling-like motion and the fastener set up itself into solely one using movement (instead of separate drilling, tapping, and putting in motions); they are hence very environment friendly in a range of hard-substrate applications, from meeting traces to roofing.

Download the India Fastener Mobile Application

5.

HEX HEAD SDS SCREW
SELF DRILLING SCREW

 

 

 

 

 

(High) Hex Washer
Head : Washer face
provides a bearing
surface for the driving
sockets.

Read moreSelf Drilling Screw

Screw Fastener

Screw Fastener 

Fasteners being a tool that silently influences our lives. Occasionally simple and sometimes complex, these unsung heroes make our world go round, and is practiced for the number of years.


Beginning with the screw, a fastener that keeps the roof over our heads and the floor under our feet. The screw thread is accepted to have been invented around 400 BCE, by Archytas of Tarentum, a Greek philosopher sometimes called “the father of mechanics.” The general principle of the screw was applied early on, in cities like Pompeii, to withdraw olive oil and grape juice. It was to a greater range developed by the Greek mathematician Archimedes to change water levels. The water screw, first introduce in Mechanica of Heron of Alexandria, was made from wood and assisted with farm irrigation and rid ships of taking in water.

Screw Fasteners – 
In 1568, Jacques Besson, a French inventor, designed the bolt and screw the giving rise to the machine. He also built a screw-cutting plate for use with lathes, which was later improved and put into wider circulation by the English company, Hindley of York. In the eighteenth century, screws confirm again when Antoine Thiet, a French clockmaker, regarded a screwdriver to a lathe, authorizing tool carriages to move semi-automatically.

No one quite sympathizes with the beginning of nuts and bolts, though we believe they came after the screw thread. The thing we know is that they came into eminence during the Industrial Revolution and their most noteworthy procedure of innovations have materialized in the last 150 years. By providing an illustration, the U.S. Standard Thread was established in the early 1870s, followed by the Society of Automotive Engineers (SAE) standard, and so on. By the late 1960s, self-drilling screws, publicized as “pinched point” or “cold forged” self-drills that cut down labor time and costs, were gaining a footing in the metal building industry.

Read moreScrew Fastener

Dome Bolts

Dome Bolts

Dome nuts mainly known Acorn nuts due to the head shape is alike to acorn.  It also comes under the name of Crown nut, Blind nut, and Dome cap nut. The nut is made in one piece along with a cap at one end and is normally made available in steel, stainless steel, Nylon, and brass.

When it was invented ?

By a lot of careful thought about some screw thread which was invented in about 400BC by Archytas of Tarentum (428 BC – 350 BC). Archytas is sometimes named as the creator of mechanics and was an existent of Plato.

Why are dome head bolts used?

They are also called as mushroom head bolts or dome head bolts. They are utilized to fasten wood to wood, instead of metal to wood.

What is a dome nut used for?

Dome nuts consist of numerous varieties of uses. From being used for its aesthetics as a cover for threaded rods and as caps for machine screws in architectural metalwork. To be utilized in the car modification business as an alternative to manufacturer-supplied nuts and fixings.

Description: Hex dome nuts or acorn nuts got their names due to the dome-shaped projection on one side of the nut. The external threads of the screws inserted into these nuts are securely surrounded within the dome. In addition to the protection it offers, these nuts provide the structure of an aesthetically pleasing look.

https://blog.indiafasteners.com/insert-nut/

Dome Head

Stainless Steel Dome head bolts also named as button heads or mushroom heads these are smooth, stylish and gives a fresh finish and are one of our best sellers. A must in any workshop these are commonly used as screen bolts, fairing bolts, mudguard bolts, number plate bolts, chain guard bolts, heat shield bolts to name just a few. Produced with rolled threads which enhances sheer strength and gives a smooth fitment, then polished to a mirror finish these corrosion-free bolts which make the most of any bodywork.

Explanation:

Hex dome nuts or acorn nuts got their names because of the dome-shaped estimate on one side of the nut. Which is widely utilized to protect objects close to the ends of screws from scratches and structural injuries. It, in addition, decreases the consequences of physical mishaps on human skin if it somehow strictly hits the fasteners. The external threads of the screws inserted into these nuts are greatly encompassed within the dome. In an exertion to the defense it provides, these nuts provide the structure of an aesthetically pleasing look.

It is obtainable in stainless steel, carbon steel, and alloy steel to carry more wear and tear while also making it more corrosion proof. The dome nuts are approached in different sizes, ensuring you use them on screws with any length. By non-payment, the size of the nut is ‘small’ which refers that it is utilized for shorter screws.

Read moreDome Bolts

Insert Nut

Insert Nut

This provides a threaded socket for a wooden workpiece, just as similar to a wall anchor. These are located into a pre-drilled hole by one of two means: screw-in and hammer in.  Which are advantageous over T-nuts and barrel nuts, due to they can be installed from one side of the workpiece.

Screw-in type

Mainly these types of insert nuts possess an external thread and hex head and are screwed in with a Flat Blade Screwdriver or an Allen wrench. The screw-in insert nuts come in multiple sizes and take different screw sizes. Take an example, of a “1/4-20” insert nut, will take a 1/4-20 inch bolt. The pre-drilled hole must be as intense as the length of the insert nut plus any portion of the bolt that may be screwed past the end of the nut in the workpiece.

Hammer-in type

This type of insert nuts, usually known as knock-in nuts, are lined with barbs and are hammered in. They are generally assembled of steel, brass or nylon. They are constructed to work in wood and particleboard.

Not all nuts attribute a traditional hexagonal shape. Whereas hexagonal nuts are popular because they are easier to turn — and therefore to install — than other shapes, but that doesn’t mean all nuts are hexagonal. Insert nuts, by taking an example, feature a cylindrical shape with exterior threading. In the below-shown image to the left, they share little or no resemblance to hexagonal nuts.

Read moreInsert Nut

Blind Rivets

Blind Rivets

Over 3000 BC rivets have been around. Where they, first of all, they appeared in Egypt, where wooden rivets were utilized to produce a variety of tools.

Sometimes after that, the wooden rivets were used as fasteners in Gaul (France) while it was under the instructions of the Roman Empire.

Whereas in the 7th and 8th centuries the Vikings installed planking on their boats using wooden rivets.

From 1840-1930 the use of rivets evolved, and so did the materials that could be fastened. Wooden constructions were widely used and joined with rivets, but the large thickness of parts being fastened resulted in structural disadvantages: for example the risk of rivets splitting made structures unreliable.

During the start of the 19th century, there was a breakthrough in the iron and steel industry which helped overcome the unreliability of wooden rivets. Wrought iron and steel, with their ductile behavior.

Ductile behavior means the ability to deform iron and steel to produce metal rivets.

A number of other methods have surfaced since then. However, rivets are still commonly used today to fasten materials together.


Blind rivets, also usually referred to as POP Rivets, are mainly used in applications where there is no access to the rear (blindside) of the joint.

Rivet pin

The pin is the main body of the rivet which will slot through the pieces of material being joined together.

Rivethead

The rivet head acts as a stopper on one side of the fixed materials.

The head will sit on the outside of the material to stop the rivet from sliding out of the material.

Read moreBlind Rivets

Pop Rivets

Pop Rivets

The History of Pop Rivets

The background of pop rivets started in t]he U.K. in the earliest 20th century. It was the British inventor Hamilton N. Wylie patented a method for installing tubular rivets from one side. Rather than the different method of pounding the metal shaft down while holding a buckboard against the back of the assembly.

Blind Rivets are the Superhero of Fasteners Industry. They got blind name because of its working nature, in blind rivet you don’t have to go through both side of any application. In other words if you can’t see the other side, then you can still join two Applications Easily. Blind Rivets Offers a Super Fastening capability and Used From Many Years. They Used in Almost Every Manufacturing Industry, Like

  • Aerospace Industry
  • Automotive Industry
  • Building Construction
  • Electrical Electronics Industry
  • Medical Instruments and Many More

Blind Rivets Commonly Known as POP Rivets. They Consists of Two Parts 1st is called Rivet and 2nd one called Mandrel. They can easily insert in any application with the use of riveting tools. The following things you have to taken into account before installing a blind rivet

As there was a need for a fastener that could be set from just one side of the workpiece aircraft designs changed from wood and metal to all-metal fabrication, during the 1920s.

Altogether, the two companies invented a rivet design with a mandrel (an object used as an aid for shaping a material head that would pop off after the rivet was set). The pop rivet, after the popping sound, heard when the rivet tool broke off mandrel head inside the shank.
Originally the rivet tool was designed by Wylie who was also adapted to set pop rivets. The tool consists of internal teeth that grabbed the long spindle, pulling it out and away from the rivet, while the head of the tool held the hollow rivet shaft in place against the workpiece. The two actions worked against each other to provide the tension that deforms and sets the blind side of the rivet.

Read morePop Rivets

Bolt Fasteners

Bolt Fasteners

The Background of Bolts

Over 200 BCE, Archimedes invented a large bolt or screw pump, making use of the screw principle. The pump contained a screw with helical threads sculptured on a shaft, fitted inside a tube. It changed radically the irrigation, allowing water to be raised from low-lying water bodies. While Archimedes is renowned with this invention, historical evidence suggests that he actually borrowed the idea from the Egyptians, who he saw using wooden screw pumps for irrigation.


Modern bolts came into existence much later, in the 15th century. This occurred when a German publisher, named Johann Gutenberg, used bolts to fasten his printing presses.  With the never-ending need for screws or bolts, engineers of the time also used bolt-cutting machines.
In spite of the use of bolt-cutting machines, bolts were still made and used on a small scale until the occurrence of the Industrial Revolution. Once the Industrial Revolution happened, industrial bolts became a vital component in the engineering world.
During the 18th century, engineers designed the “first thread cutting machines”, clearing and paving the way for the mass production of screws. The reasons are different companies had their own standards for manufacturing industrial bolt threads, the market was flooded with an arrangement of different sized screw threads.
To overcome this problem, in 1841, Joseph Whitworth, an English engineer, came up with the idea of standardizing the size of the screw threads in industrial bolts. His recommendation was a standardized angle of the thread flanks and numbers of threads per inch. His efforts brought a change in the industrial bolts industry in Britain. Concurrently, across the Atlantic Ocean, American and Canadian engineers made similar efforts, making bolt threads standardized for specific diameters.\

Read moreBolt Fasteners